B&K Precision 2542B Manual de usuario descargar pdf (Pagina 87)

Menu Operation

networks. Move the cursor to the Gateway IP position

and enter the gateway address in the IP address format

using the entry knob.

 Set the DNS IP. DNS is an internet service that

translates domin names into IP addresses. Move the

cursor to the DNS IP position and enter the address of

the DNS server in the IP address format using the entry

knob.

Note: If you are manually entering the LAN settings, you

may need to restart the oscilloscope for settings

to apply. If you are using DHCP, first turn on

DHCP, then select OK and wait a few seconds

until the Configure Status shows “DHCP”.

Otherwise, it may not be able detect the correct

DHCP settings from the connected network. We

recommend configuring with DHCP.

Note: The instrument does not support socket or telnet

connection. When interfacing over LAN, if

settings were changed or refreshed (from

selecting OK from softpanel menu), the

instrument may need to be rebooted first before it

can be connected for remote control.

1 2 ... 82 83 84 85 86 87 88 89 90 91 92 ... 249 250

Sin comentarios

B&K Precision 2542B Manual de usuario Pagina 87